OTS ET1111PpH-S-DR Quick Installation Manual

Description:
Hardened Grade 10/100Base-TX (PoE+) to 100Base-FX Ethernet Media Converter
Overview:
ET1111PpH-S-DR is a DIN rail type media converter that supports external SFP. The
Ethernet port support IEEE 802.3at standard up to 30W. It is a hardened grade
product whose operating temperature range is
supports 100M Ethernet port and 100M SFP port. The Ethernet port supports both
half-duplex and full-duplex mode. Users can use different type of SFP modules (single-
mode/multi-mode fiber, 1/2 core) as needed.
Package Content
⚫
Media Converter x 1
⚫
Quick Start Guide x 1
⚫
Din Rail mount bracket x 1
◎
Keep power off during installation
◎
use Antistatic Wrist Strap correctly
◎
Make sure using correct power supply, voltage must match
◎
Make sure enough power supply from PSU that will not overload
◎
Double check the wiring ( +/- ) is correct.
◎
Keep installation dry and clean.
◎
Do not open the chassis
Quick Installation Guide
ET1111PpH-S-DR
Read Before Install
Quick Installation Guide
ET1111PpH-S-DR / version 2.2
-40°C to 75°C. ET1111PpH-S-DR
OT Systems Ltd. | www.ot-systems.com