FT200 Series Installation & Operation Manual Installation and Operation Manual FT200 Series 10-bit Digital Series 2-ch Video Fiber Optic Converter OT Systems Ltd., 2014 Rev 1.2 www.ot-systems.com...
FT200 Series Installation & Operation Manual (1) Safety Instructions Please be familiar with all information in this manual prior to installation and operation. Note 1: The products described contain a Class 1 laser or LED fiber optic emitter. The following safety precautions apply.
FT200 Series Installation & Operation Manual (2) Product Overview 2.1 Introduction The FT200 Series products comprise of either single-mode or multi-mode fiber optic transmitters and receivers for the optical transmission of TWO forward (Tx → Rx) video singals on one fiber. The products work at wavelengths of 1310nm or 1550nm with either a 9/125um or 62.5/125um fiber for single-mode or multi-mode transmission respectively.
FT200 Series Installation & Operation Manual (3) Installation 3.1 General All OT Systems products are thoroughly inspected, tested and securely packaged before delivery to ensure a stable, intact and trouble-free service. Please check the equipment upon receipt for any visible damage which may have been caused during shipping. The FT200 Series standalone units (Fig.
FT200 Series Installation & Operation Manual 3.3 Card module installation Insert the card module into the FT-C18 chassis along the top and bottom card guides of an empty slot and push the card into the multi-pin socket at the rear firmly. Secure with the provided thumb screws.
Page 9
FT200 Series Installation & Operation Manual Standalone Transmitter Card Module Receiver Fig 4.2 Standalone unit to Card Module connection diagram Card Module Transmitter Card Module Receiver Fig 4.3 Card Module to Card Module connection diagram www.ot-systems.com...
FT200 Series Installation & Operation Manual 4.2 Ground connection For enhanced safety to reduce the risks of electrical shock and physical damage, caused by lightning and other power surges, as well as a connection to the surge suppresion devices in the product, a screw terminal is provided on the Standalone cabinets (Fig.
FT200 Series Installation & Operation Manual (5) Operational Guides 5.1 FT200 Series Transmitter LED Indicators Indicator Color Description Lit when power is supplied to the Transmitter. Yellow Lit when optical signal from receiver to transmitter is active.* Green VIDEO IN / Lit when video signals are fed into the VIDEO IN connectors.
FT200 Series Installation & Operation Manual (7) Drawings Fig. 7.1 Dimensional drawings of Standalone unit (mm) (8) Warranty Information All OT Systems FT Series products are subject to a limited life-time warranty offered by the company in normal circumstances. Please refer to the OT Systems Products Warranty Statement for details.
FT200 Series Installation & Operation Manual (9) Contact Information APAC Operation EMEA Operation AMERICAS Operation Address: Address: Address: Unit 1023, 10/F, Landmark J. Slovackio str. 4, LT-11107, 18 West Main Street, Plano, North, 39 Lung Sum Avenue, Vilnius, Lithuania IL 60545, U.S.A. Sheung Shui, N.T., Hong Kong Tel: (852) 2672 5153 Tel: (370) 60730087...