OTS ET1111 Series Manual

ET1111 series (short version)
Industrial Grade Microtype 10/100Base-TX to 100Base-FX Ethernet Media Converter
This quick start guide describes how to install and use the Industrial Media Converter. This is the Media Converter of
choice for harsh environments constrained by space.
Physical Description
The 100Base-FX connections, Terminal Block and Power Inputs
Model Number:
ET1111-X-MT
Top Panel
Bottom Panel
*There will be no "TX" and
"RX" in single fiber condition.
Top panel－The fiber port(s) for 100Base-FX connections
The 100Base-FX Connections
The TX (transmit) port of device I is connected to the RX (receive) port of device
II, and the RX (receive) port of device I to the TX (transmit) port of device II.
The WDM 100Base-FX Connections
Only one single-mode optical fiber is required to transmit and receive data.
Bottom panel－Ethernet Port and Power Input
1
X value:
A for Multimode fiber
B for Singlemode fiber
FIBER Connector
TX SC Optical Connector
RX SC Optical Connector
X value:
G for Multimode fiber
H for Singlemode fiber
FIBER Connector
TX ST Optical Connector
RX ST Optical Connector
X value:
C and D for Multimode fiber
H and F for Singlemode fiber
Connector
FIBER
SC Optical Connector
X value:
I and J for Multimode fiber
K and L for Singlemode fiber
Connector
FIBER
ST Optical Connector
Ethernet Port
NETWORK RJ45 Connector
Power Input Assignment
V2.3