Door Bins; Glass Shelves - Bertazzoni RFD90S5FPNS-GM User And Maintenance Manual

Table of Contents

Advertisement

OPERATING THE APPLIANCE
FREEZER
-24℃ (-11℉)
-18℃ (0℉) or colder
Recommended Operating Temperature:
Fridge: 4℃ (39℉), Freezer: -18℃ (0℉).

DOOR BINS

To remove a door bin, hold it from the bottom, lift it and slide
it out. Please see the figure.
To adjust the height of a door bin, press and hold the
buttons at the right and left sides to adjust the bin to the
desired height without having to remove it. To remove the
adjustable door bin, press and hold the buttons, lift the bin
completely and pull it towards yourself. To reinstall the door
bin, position it in its place on the door and press the buttons
to slide it downwards. Please see the figure.
FRIDGE
Use these settings if you think that your fridge
compartment is not cold enough because of hot
2℃ (35℉)
ambient conditions or frequent opening and closing of
the door.
Use this function when you are putting a lot of things
into the fridge compartment at once or when you need
Super Cool
to cool your food quickly. It is recommended that you
activate the Super Cool function 4-8 hours before
adding the food.

GLASS SHELVES

The height of the glass shelves can be adjusted manually
using the rear hangers. Holding a shelf from the bottom, lift
Fig. 4
the front part and raise it to an angled position; the tabs on
the hangers will be released and the glass shelf will move
up and down.
To remove a shelf
Hold the front of the shelf, then gently lift up and slide it
out.
To reinsert
Hold the shelf at an angle so that the front is higher than
the back, then insert the top hook into the top shelf notch
you wish to use.
Lower the front gently.
NOTES
NOTE
To prevent breakage or scratching the
interior of the fridge, use care when
handling glass shelves.
Fig. 5
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rfd90s5fpns

Table of Contents