Installation Instruction (Door On Door Hinge) - Bertazzoni Professional REF BBNPTC Series User And Maintenance Manual

INSTALLATION INSTRUCTIONS
• A 20 mm
3) Fill the gap on the non-hinged side with the gasket/
sealing strip provided.
A
• A Seal
4) The finished look for the door sliders should be similar to
those shown in the following image, which shows 2
sliders in place.
• A Cabinet door
Ensure the appliance doors open, close and seal
properly.
Once complete, and if you are happy with the fit of the
appliance in the cabinet, bend and snap off the parts of the
white spacers marked "S", as shown by the dotted outline.
A
Fig. 15
Fig. 16
A
Fig. 17
Leave the remaining portions of the spacer covers in place
over the metal plates.
IMPORTANT
After completing the installation, check that the
appliance is secure within the cabinet and that
the door(s) close and open properly. If there is
no resistance from the door seals when
opening the door(s), then it is probable that the
appliance and/or cabinet door (s) are not fitted
properly.
INSTALLATION INSTRUCTION (DOOR ON
DOOR HINGE)
TOOLS AND PARTS
S
Fig. 18
Spacer for hinge A
Spacer for hinge B
Hinge cover
Crosshead screws
3.9 x 12, T20
3.9 x 16, T20
Spanner
Left cover for control-panel
spacer
Right cover for control-
panel spacer
Decorative strip
21