Subscribe to Our Youtube Channel
Related Manuals for Intesis IntesisBox KNX Series
Summary of Contents for Intesis IntesisBox KNX Series
- Page 1 IntesisBox ® Fujitsu VRF Air Conditioning User Manual Issu Date: 01/2019 r1.0 EN...
- Page 2 No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or any means electronic or mechanical, including photocopying and recording for any purpose other than the purchaser’s personal use without the written permission of Intesis Software S.L.U. Intesis Software S.L.U.
- Page 3 Gateway for the integration of Fujitsu VRF systems into KNX home automation systems. Order code: IBKNXFGL016O000, 16 indoor units email: info@intesisbox.com 3/30 This information is subject to change without prior notice web: www.intesisbox.com IntesisBox is a registered trademark of Intesis Software S.L.U. phone: +34 938047134...
-
Page 4: Table Of Contents
Connection to the configuration tool ......................10 Set-up process and troubleshooting ........................11 Pre-requisites .............................. 11 IntesisBox MAPS. Configuration & monitoring tool for IntesisBox KNX series ........... 11 4.2.1 Introduction ............................11 4.2.2 Connection ............................11 ... -
Page 5: Description
Ethernet TCP Ethernet configuration configuration Integration of Fujitsu VRF systems into KNX control systems email: info@intesisbox.com 5/30 This information is subject to change without prior notice web: www.intesisbox.com IntesisBox is a registered trademark of Intesis Software S.L.U. phone: +34 938047134... -
Page 6: Functionality
IntesisBox Its order code is: IBKNXFGL016O000: Model supporting up to 16 indoor units email: info@intesisbox.com 6/30 This information is subject to change without prior notice web: www.intesisbox.com IntesisBox is a registered trademark of Intesis Software S.L.U. phone: +34 938047134... -
Page 7: Knx System
2 KNX System In this section, a common description for all IntesisBox KNX series gateways is given, from the point of view of KNX system which is called from now on internal system. Connection with the Fujitsu system is also called from now on external system. - Page 8 KNX – FUJITSU VRF User Manual r1.0 EN These properties are common for all IntesisBox KNX series gateways. Although each integration may have specific properties according to the type of signals of the external system. See list of communication objects in section 9.
-
Page 9: Connections
Connect a USB storage device (not a HDD) if required. Check the user manual for more information. Ensure proper space for all connectors when mounted (see section 6) email: info@intesisbox.com 9/30 This information is subject to change without prior notice web: www.intesisbox.com IntesisBox is a registered trademark of Intesis Software S.L.U. phone: +34 938047134... -
Page 10: Power Device
USB: Using the console port of IntesisBox, connect a USB cable from the console port to the PC. email: info@intesisbox.com 10/30 This information is subject to change without prior notice web: www.intesisbox.com IntesisBox is a registered trademark of Intesis Software S.L.U. phone: +34 938047134... -
Page 11: Set-Up Process And Troubleshooting
Link to download the configuration tool. USB Console cable to communicate with IntesisBox. Product documentation. IntesisBox MAPS. Configuration & monitoring tool for IntesisBox KNX series 4.2.1 Introduction IntesisBox MAPS is a Windows ® compatible software developed specifically to monitor and configure IntesisBox new generation gateways. -
Page 12: Configuration Tab
Set parameters of KNX interface of IntesisBox. Figure 4.3 IntesisBox MAPS KNX configuration tab email: info@intesisbox.com 12/30 This information is subject to change without prior notice web: www.intesisbox.com IntesisBox is a registered trademark of Intesis Software S.L.U. phone: +34 938047134... - Page 13 KNX will not necessarily be the same (actually, user will not be able to operate setpoint from AC System controllers as the remote controller). email: info@intesisbox.com 13/30 This information is subject to change without prior notice web: www.intesisbox.com IntesisBox is a registered trademark of Intesis Software S.L.U. phone: +34 938047134...
- Page 14 4.5. Use of 1-bit Fan Speed. 1-bit Status Objects. Enables a bit-type object for monitoring of each Vanes Position. email: info@intesisbox.com 14/30 This information is subject to change without prior notice web: www.intesisbox.com IntesisBox is a registered trademark of Intesis Software S.L.U. phone: +34 938047134...
-
Page 15: Fujitsu Configuration
VRF bus (units not powered, bus not connected, …). email: info@intesisbox.com 15/30 This information is subject to change without prior notice web: www.intesisbox.com IntesisBox is a registered trademark of Intesis Software S.L.U. phone: +34 938047134... - Page 16 After units to be integrated are selected, click button Apply, and changes will appear in previous Units Configuration window. Figure 4.7 IntesisBox MAPS Fujitsu configuration tab after importing scan results email: info@intesisbox.com 16/30 This information is subject to change without prior notice web: www.intesisbox.com IntesisBox is a registered trademark of Intesis Software S.L.U. phone: +34 938047134...
-
Page 17: Signals
All available KNX objects, its corresponding description and other main parameters are listed in the signals tab. Figure 4.8 IntesisBox MAPS Signals tab email: info@intesisbox.com 17/30 This information is subject to change without prior notice web: www.intesisbox.com IntesisBox is a registered trademark of Intesis Software S.L.U. phone: +34 938047134... -
Page 18: Sending The Configuration To Intesisbox
Signals Viewer to simulate the BMS behavior or to check the current values in the system. email: info@intesisbox.com 18/30 This information is subject to change without prior notice web: www.intesisbox.com IntesisBox is a registered trademark of Intesis Software S.L.U. phone: +34 938047134... - Page 19 More information about the Diagnostic section can be found in the Configuration Tool manual. email: info@intesisbox.com 19/30 This information is subject to change without prior notice web: www.intesisbox.com IntesisBox is a registered trademark of Intesis Software S.L.U. phone: +34 938047134...
-
Page 20: Set-Up Procedure
Figure 4.11 Enable COMMS email: info@intesisbox.com 20/30 This information is subject to change without prior notice web: www.intesisbox.com IntesisBox is a registered trademark of Intesis Software S.L.U. phone: +34 938047134... -
Page 21: Electrical & Mechanical Features
1 x DIP-Switch for PORT B configuration: Switch B Reserved for future use (leave OFF, default) (SWB) email: info@intesisbox.com 21/30 This information is subject to change without prior notice web: www.intesisbox.com IntesisBox is a registered trademark of Intesis Software S.L.U. phone: +34 938047134... -
Page 22: Dimensions
Recommended available space for its installation into a cabinet (wall or DIN rail mounting), with space enough for external connections 100 mm (h) 100 mm (w) 130 mm (d) email: info@intesisbox.com 22/30 This information is subject to change without prior notice web: www.intesisbox.com IntesisBox is a registered trademark of Intesis Software S.L.U. phone: +34 938047134... -
Page 23: Ac Unit Types Compatibility
7 AC Unit Types compatibility The gateway is compatible with Fujitsu VRF units after the VRF-II series. email: info@intesisbox.com 23/30 This information is subject to change without prior notice web: www.intesisbox.com IntesisBox is a registered trademark of Intesis Software S.L.U. phone: +34 938047134... -
Page 24: Error Codes For Indoor And Outdoor Units
Discharge temperature 1 abnormal Discharge temperature 2 abnormal Compressor temperature abnormal Pressure abnormal 1 Pressure abnormal 2 email: info@intesisbox.com 24/30 This information is subject to change without prior notice web: www.intesisbox.com IntesisBox is a registered trademark of Intesis Software S.L.U. phone: +34 938047134... - Page 25 Connection unit number error in wired remote controller system Indoor unit communication circuit (wired remote controller) error email: info@intesisbox.com 25/30 This information is subject to change without prior notice web: www.intesisbox.com IntesisBox is a registered trademark of Intesis Software S.L.U. phone: +34 938047134...
-
Page 26: Appendix A - Communication Objects Table
0-Auto, 1-Heat, 3-Cool, 9-Fan, 14-Dry Control _Operation mode 1 byte Non-standarized 0-Auto, 1-Heat, 2-Dry, 3-Fan, 4-Cool email: info@intesisbox.com 26/30 This information is subject to change without prior notice web: www.intesisbox.com IntesisBox is a registered trademark of Intesis Software S.L.U. phone: +34 938047134... - Page 27 Status_Fan speed med-low 1 bit DPT_Switch 1.001 1-Speed med-low active, 0-Speed med-low not active email: info@intesisbox.com 27/30 This information is subject to change without prior notice web: www.intesisbox.com IntesisBox is a registered trademark of Intesis Software S.L.U. phone: +34 938047134...
- Page 28 1-Position 1..5-Position 5 Thersholds (0%..29%; 30%..49%; 50%..69%; Control_Vanes LR scaling 1 byte DPT_Scaling 5.001 70%..89%; 90%..100%) email: info@intesisbox.com 28/30 This information is subject to change without prior notice web: www.intesisbox.com IntesisBox is a registered trademark of Intesis Software S.L.U. phone: +34 938047134...
- Page 29 0-No disabled, 1-Disabled REMOC. Control_On/Off Remote controll 1 bit DPT_Bool 1.002 0-No disabled, 1-Disabled disablement email: info@intesisbox.com 29/30 This information is subject to change without prior notice web: www.intesisbox.com IntesisBox is a registered trademark of Intesis Software S.L.U. phone: +34 938047134...
- Page 30 0-Thermostat on, 1-Thermostat off OTHERS Status_Thermostat off 1 bit DPT_Switch 1.001 0-Thermostat on, 1-Thermostat off email: info@intesisbox.com 30/30 This information is subject to change without prior notice web: www.intesisbox.com IntesisBox is a registered trademark of Intesis Software S.L.U. phone: +34 938047134...
Need help?
Do you have a question about the IntesisBox KNX Series and is the answer not in the manual?
Questions and answers