Table of Contents
Advertisement
FlameSpec IR3 H2 HD User Manual
7 Servicing
The detector contains no user serviceable parts. In the event the detector has been damaged or is deemed to
not be working properly, it should be returned to the manufacturer for repair. For technical assistance and to
request a returns authorization number contact technical support on: (+1) 714-671-8500 or via email at
support@fg-detection.com. Refer to the detector warranty statement in section 12.
8 FGD Communicator Software
The FGD Communicator software can be used to configure and monitor the FlameSpec-IR3 flame
detector. The software communicates using Modbus over an RS-485 port to the detector. Modbus
commands enable the user to configure parameters and monitor the status of the detector. For details
of how to download the software and be sent a copy of the manual please contact technical support on:
(+1) 714-671-8500 or via email at support@fg-detection.com.
For more information & technical support: (+1) 714-671-8500 · support@fg-detection.com
F140V0020.07
29
Advertisement
Table of Contents
