Electrical Wiring; Figure 14 - Terminal View - FGD FlameSpec IR3 H2 HD User Manual

FlameSpec IR3 H2 HD User Manual

Electrical Wiring

Warning
•
The sensor module in the front half of the detector contains no serviceable components
and should never be opened. Opening will invalidate the warranty of the detector. The
terminal compartment at the back is the only part of the housing that should be opened
by the user.
•
The detector has 22 screw terminals as shown in the following figure and table:
For more information & technical support: (+1) 714-671-8500 · support@fg-detection.com
F 14 – T V
IGURE ERMINAL IEW
F140V0020.07
14