Page 11
DO200 MKII S DSD CHANNEL DSD声道设置 DSDL = PCM DATA (DSD左声道和PCM的数据引脚共用)(默认) DSDL = PCM LRCK (DSD左声道和PCM的LRCK引脚共用) S DATA +/DSD DATA R + S DATA +/DSD DATA L + S DATA -/DSD DATA R - S DATA -/DSD DATA L -...
Dismantling, refitting, repairing by user in private. Causing damage by using some fittings instead of the designative or accredited ones. Cannot provide credible proof of purchase. 4.Sending it back to our company for repairing. 5.Contact your S.M.S.L Audio reseller for a return or replacement.
Page 15
DO200 MKII Features Both USB and SPDIF support MQA decoding function, and support MQA-CD; 2x advanced ES9068AS D/A chips, fully optimized to THD+N as low as -122dB, far exceeding the official specifications; 5x High-End dual op amp OPA1612A and a large number of audio grade components;...
DO200 MKII Remote control Install 2 x AAA batteries as instructions. When using the remote control, point it toward the remote con-trol signal receiver on the main unit from a distance of 5 m (16 ft) or less. Do not place obstructions between the main unit and the remote control.
Bluetooth antenna Balanced output AES/EBU input S input AC IN(100-240VAC) Coaxial input USB input Power switch Package list 1* SMSL DO200 MKII 1* Remote control 1* Bluetooth antenna 1* USB cable 1* AC power cable 1* User manual 1* Warranty card...
Page 19
The DO200 MKII LED next to MQA logo glows green or blue to indicate that the unit is decoding and playing an MQA stream or file, and denotes provenance to ensure that the sound is identical to that of the source material.
Page 20
DO200 MKII Instructions NPUTS BLUETOOTH OPTICAL COAXIAL AES/EBU I2S(HDMI) OUTPUTS ALL LINE OUT BALANCED UNBALANCED PCM FILTER Fast Linear Slow minimum Minimum Phase...
Page 21
Volume control enable or disable. Vol Fixed : In this mode, volume is fixed on max output level, and the DO200 MKII will ignore the volume operations. Vol Variable: In this mode, volume can be adjust, and make DO200 MKII a pre-amplifier.
Page 22
DO200 MKII FN KEY FOR Outputs Bluetooth PHASE DPLL MIN ~ MAX (A total of 15 kinds, the default is 5 kinds. The larger the number is, the stronger the range to adapt to jitter, and the smaller the number, the better the performance against clock jitter.)
Page 23
DO200 MKII S DSD CHANNEL DSDL=PCM DATA (The DSD left channel using the PCM DATA pin) DSDL=PCM LRCK (The DSD left channel using the PCM LRCK pin) S DATA +/DSD DATA R + S DATA +/DSD DATA L + S DATA...
Page 24
DO200 MKII BRIGHTNESS LEVEL 1 ~ LEVEL 6 RESET During Bluetooth input, long press the middle button of the knob, the system will only reset the Bluetooth pairing status; During other input, long press the middle button of the knob, the system will...
Page 25
DO200 MKII 取扱説明書 ※改良等の理由により、 予告なく仕様およびデザインを変更する事があります。 Ver 1.1...
Page 35
DO200 MKII S DSD CHANNEL DSD チャンネル設定 DSDL = PCM DATA (DSD左チャンネルとPCMデータ端子で共有) ( デフ ォルト) DSDL = PCM LRCK (DSD左チャンネルとPCMのLRCK端子間で共有) S DATA +/DSD DATA R + S DATA +/DSD DATA L + S DATA -/DSD DATA R - S DATA...