To Install In Windows 98/2000/Xp; To Use The Isdn Mta128St-Usb Configuration Utility - Multitech MTA128ST Quick Start Manual

If you are using a Windows operating system, you may also use Dial-Up Networking to configure
your adapter. Refer to the on-line User Guide for configuration information.

To Install in Windows 98/2000/XP

1. When installing from disk, insert the Setup disk (provided in your MTA128ST-USB
package) into drive A or B. If installing from a network location, connect to it. (Note the
drive letter. You may need it if you run Setup again.)
2. Click Start | Settings | Control Panel.
3. Double-click the Add/Remove Programs icon.
4. For Windows 98 users, click Install on the Install/Uninstall tab.
For Windows 2000/XP users, click the Add New Programs icon.
5. Follow the instructions that appear on screen.

To Use the ISDN MTA128ST-USB Configuration Utility

1. To start the utility, click Start | Programs.
2. Double-click the ISDN MTA128ST-USB Configuration Utility icon.
3. The ISDN TA Configuration Wizard displays.
Select the type of Setup (e.g., Express (Existing), Configuration (e.g., EuroISDN), and then
click Next >. Follow the instructions provided in each succeeding dialog box.
4. Refer to the "Network Configuration" planning sheets in the previous section as you
configure the unit. If you have questions about choices in a dialog box, click Help.
Multi-Tech Systems, Inc. MTA128ST-USB External ISDN Terminal Adapter PN S000340
Chapter 3 - Configuration
24