Page 1
Portable Oxygen Concentrator Now that you have unpacked each box, you have GETTING STARTED GUIDE everything you need to start using your P2. The set-up of your P2 is quick and simple. Before using the P2, please read and understand the entire user manual.
Page 2
Slide flat side of the Connect the AC connector to battery into place until the P2. The green LED on the the latch returns to the power adapter will be on upper position and you and the concentrator will hear it click into place.
Change the P2 Concentrator setting to ADDITIONAL INFORMATION: the flow rate prescribed by your When adapter is connected/disconnected physician or clinician. or battery is installed/uninstalled, unit will beep and the display will show power Press the + or – setting buttons for the supply information.
Page 4
If batteries become wet, stop use immediately and dispose of battery properly. Battery Replacement 2. Press down the latch, and slide the battery out. 2. Insert the new P2 battery by sliding battery into place until the latch returns to the upper position.
Page 5
Store battery in a cool, dry place. Store with a charge of 40-50%. Batteries should not be left dormant for more than 90 days at a time.
Need help?
Do you have a question about the P2 and is the answer not in the manual?
Questions and answers