Installation In Windows Me - Multitech MultiModem MT5634ZBA-USB User Manual

MultiModemUSB User Guide
9. A screen appears briefly. After the files have been copied to your PC, a
Copying Files
screen appears indicating that Windows has finished installing the driver. Click
Hardware Wizard
to complete the installation and exit the wizard.
Finish
After installation is complete, you should test the operation of your new MultiModemUSB by registering it.
Key in the URL given below and follow the online instructions at:

Installation in Windows ME

The MultiModemUSB driver files for Windows ME are installed in two groups, as described below. The
installation wizard begins by installing certain driver files. At that point, Windows ME detects the modem
as a new device. Then the installation wizard runs again to install the remaining driver files.
1. Power up your Windows ME computer.
2. If you have not already done so, make all the necessary connections.
3. Place the MultiModemUSB CD into the CD drive of your PC. Windows ME will detect that the new
modem is present and launch the
"What would you like to do?"
Choose
Specify the location of the driver (Advanced)
4. At the
Add New Hardware Wizard
"Removable Media" button (if necessary) and check "Specify a location."
5. Click the "Browse" button and navigate to the "Windows ME" subfolder of the "Drivers" folder on the
MultiModemUSB CD. Click
6. The
Add New Hardware Wizard
7. Transient progress screens will appear while files are being copied. After the files have been copied
to your PC, an
Add New Hardware Wizard
installing this the first of two drivers.
Click to complete the installation of this first driver. The wizard will close.
Finish
8. Windows ME will now detect an "Unknown Device" and begin another Add New Hardware Wizard,
again asking "What would you like to do?"
Choose "Specify the location of the driver (Advanced)" and click Next>.
9. At the next screen, (the
uncheck the "Removable Media" button (if necessary) and check "Specify a location." Click
10. Transient screens will appear while files are being copied. The
driver file search..." screen will appear. Click
11. After files have been copied, a completion screen will appear.
Click to complete the installation of this the second driver. The wizard will close.
Finish
12. Remove the MultiModemUSB CD from the computer's CD drive.
13. Test the operation of your modem by registering it online at http://www.multitech.com/register.
Add New Hardware Wizard
"Windows will search for new drivers ..." screen, uncheck the
. Click if it prompts you for a floppy disk.
OK Cancel
"Windows driver file search ..." screen appears. Click
screen will appear indicating that Windows has finished
Add New Hardware Wizard
Next
http://www.multitech.com/register
screen. This message then displays:
and click .
Next
"Windows will search for new drivers..." screen),
Add New Hardware Wizard
.
Chapter 2 - Installation
Found New
.
Next
.
Next
"Windows
9