Table of Contents
Advertisement
Redback
A 4450 4 x 4 Audio Matrix/Switcher
®
13.0 WALLPLATE SETTINGS MENU
Each wallplate has a settings menu which can be accessed using the icon on the top left of the screen (marked 1 in figure
3 & 4). Once in this menu the following screen will be displayed.
Adjust
System
Backlight
Actions
Colour
Scheme
Adjust backlight - Allows you to select active brightness and dimmed brightness levels of the wallplate with the time out
period selectable for each level before the wallplate switches the screen off.
System actions - Allows you to choose settings for audible feedback on touch (on/off), screen rotation and wallplate/fac-
tory reset functions.
Set unit address - Each wallplate in the system must have a unique address from 1 to 16. This setting allows you to enter
the address for the plate you are using. Blanked out numbers are addresses already in use.
Set access PIN - Set an optional access PIN preventing unauthorised access to the wallplates settings. Type in a preferred
PIN and press "E" to accept. Press "C" to delete pin digits or reset PIN.
Change labels (master wallplate only) - Allows you to set and change the custom labels for the output zones and
audio sources.
Colour scheme - Set button colour scheme to preset red, blue or black/white. Note that other colour schemes can be
provided via firmware update.
Set plate zone (Zone wallplate only) - Allows you to select which zone the wallplate is operating in.
12
Redback® Proudly Made In Australia
Set Access
Set Unit
Address
PIN
Fig 7 - Wallplate Settings. Master (left), Zone (right).
Change
Labels
Back
www.redbackaudio.com.au
Set Plate
Set Unit
Zone
Address
Adjust
System
Backlight
Actions
Set Access
Colour
PIN
Scheme
Back
Advertisement
Table of Contents
