Page 1
A 4450 4 x 4 Audio Matrix/Switcher ® A 4461 Master Plate A 4464 Zone Selector Plate A 4450 Controller Operating Manual A 4450 4 x 4 Audio Source Matrix/Switcher Optional Accessories A 4461 7” Master Wall Plate Black A 4462 4.3” Zone Wall Plate Black A 4463 7”...
Page 2
100% developed, designed & assembled in Australia. Since 1976 we have been manufacturing Redback amplifiers in Perth, Western Australia. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support.
Redback A 4450 4 x 4 Audio Matrix/Switcher ® 1.0 INTRODUCTION The A4450 master unit can be configured to operate as either a 4x4 Matrix, allowing any combination of inputs to be selected to an output, or as a Switcher, enabling only one input to be selected to an output at any time. This is set by the installer via a DIP switch on the rear panel.
Redback A 4450 4 x 4 Audio Matrix/Switcher ® 4.0 FRONT PANEL GUIDE Fig 1 shows the layout of the A 4450 front panel. A 4500 Input/Output Selection A 4450 Inputs Outputs 24 Hour 7 Day Timer 4 x 4 Audio Switcher...
Redback A 4450 4 x 4 Audio Matrix/Switcher ® 5.0 REAR PANEL GUIDE Fig 2 shows the layout of the A 4450 rear panel. Outputs Input 4 Input 3 Input 2 Input 1 Wall Plates Console 2 Made in Australia by Altronic Distributors www.redbackaudio.com.au...
(see section 7.0 for details). When the A 4450 is in Matrix Mode (Refer to DIP switch setings) any or all of the four inputs can be mixed independently into any or all of the four output zones of the Matrix.
Redback A 4450 4 x 4 Audio Matrix/Switcher ® (MATRIX MODE) 8.0 MASTER WALLPLATE OPERATION FUNCTN RM1 Zone Selection Input & Volume Selection DAB RADIO FOXTEL FUNCTN RM1 RESTAURANT Vol+ Vol+ DAB RADIO : 50% DAB RADIO : OFF FOXTEL : 45%...
Redback A 4450 4 x 4 Audio Matrix/Switcher ® (MATRIX MODE) 9.0 ZONE WALLPLATE OPERATION Settings Button Tap this to access zone wallplate settings ie: to adjust wall LOUNGE plate colour theme and backlight settings. DAB RADIO FOXTEL Volume Slider...
Redback A 4450 4 x 4 Audio Matrix/Switcher ® (SELECTOR MODE) 10.0 MASTER WALLPLATE OPERATION DINING Zone Selection Input Selection DINING FAMILY DAB RADIO DAB RADIO 2 DAB RADIO : 50% DAB RADIO 2 : 50% FOXTEL MP3 PLAYER Volume Control...
Redback A 4450 4 x 4 Audio Matrix/Switcher ® (SELECTOR MODE) 11.0 ZONE WALLPLATE OPERATION Settings Button Tap this to access zone wallplate settings ie: to adjust wall plate colour theme and backlight settings. FAMILY Input Selection Audio Source Input Selection Buttons Choose between the audio sources connected to the system.
Redback A 4450 4 x 4 Audio Matrix/Switcher ® 13.0 WALLPLATE SETTINGS MENU Each wallplate has a settings menu which can be accessed using the icon on the top left of the screen (marked 1 in figure 3 & 4). Once in this menu the following screen will be displayed.
The paging console connects to the A 4450 controller via Cat5e UTP or similar cabling and can be located up to 200m away. Connection is made to the rear of the A 4450 using either of the ports labelled “Console 1” and “Console 2”. Refer to figure 13 for connection details.
Page 14
Output Zone Name The name of the output zone that sources are displayed for. Fig 9. Console in Master Wallplate mode. A 4450 in Matrix Mode. Input & Volume Selection Area This area is used to adjust the audio sources in the chosen output zone.
Redback A 4450 4 x 4 Audio Matrix/Switcher ® 15.0 A 4660 PAGING CONSOLE SETTINGS MENU Each paging console has a settings menu which can be accessed using the icon on the top left of the screen (marked 1 in figures 8, 9 &...
A 4450 4 x 4 Audio Matrix/Switcher ® 16.0 DIP SWITCH SETTINGS The A 4450 has 4 sets of DIP switches, these are used to set input and output sensitivity. DIP1 and DIP2 select the input level sensitivites for inputs 1 - 4. DIP 1 Switch 1 - Sets Mic 2 input sensitivity to either OFF - 0.7V or ON - 3mV.
A maximum of 2 paging consoles can be connected to the A 4450 controller via Cat5e UTP or similar cabling and can be located up to 200m away. Connection is made to the rear of the A 4450 using either of the ports labelled “Console 1”...
18.0 SERIAL CONTROL PROTOCOL & CODES FOR THIRD PARTY CONTROL SYSTEMS The A 4450 can be remotely controlled using standard RS232 command codes, transmitted from the likes of a PC or Laptop or other third party controller. The RS232 output will be required to be converted to RS-485 communication for connection to the A 4450.
A 4450. The output of the S 9721 can then be wired to the Adapter port on the rear of the A 4450. Pin 5 (RS485-A), pin 4 (RS485-B) and pin 8 (ground) of a standard Cat5 cable are the only connections requiring termination.
6. With the power turned off, insert the SD card back into the A 4450. 7. Turn power on to the A 4450. The unit will check the SD card and if an update is required the A 4450 will perform the update automatically.