Redback A 4450 Operating Manual page 14

4 x 4 audio matrix/switcher
Table of Contents

Advertisement

Redback
A 4450 4 x 4 Audio Matrix/Switcher
®
RECORDINGS
When fitted with a Micro SD card, users can record announcements for quick recall and playback when required. To record
an annoucement, press the "Recordings" button and the "Record" button. Instructions are provided on the screen to
assist with recording quality. When ready, press "Start record", make your annoucement into the microphone, and press
"Stop record" when complete. Press "Save file" and give your recording a suitable name. This recorded annoucement will
now be available in the recording menu. To delete a recording tap the recording file name, tap and hold the "Delete" but-
ton for 5 seconds. The recording system can also be used to playback files from external sources. Any suitable file (MP3,
OGG, WAV format) located in the "recordings" folder on the SD card will be available for playback.
(Note: The Micro SD card will need to be removed from the paging console and the music files added to the "recordings"
folder via the use of a PC or laptop.)
ZONE CONTROL OPERATION
When the paging console is in Master wallplate mode it allows for audio source selection and level control for every out-
put zone. The functionality is exactly the same as a Master Wallplate in Matrix or Switcher modes (Refer to sections 8.0
and 10.0).
To access paging functionality press the "Switch to Paging" button.
1
Settings Button
Tap this to access settings to
adjust output zone / audio source
names, colour themes, backlight
settings and paging settings.
Refer to section 13.0 for details.
2
Zone Selection Area
This area is used to toggle be
-tween the four output zones to
adjust to source selection & level
control.
3
Switch to paging mode
Switches the screen to Paging
Mode to make announcements.
4
Output Zone Name
The name of the output zone
that sources are displayed for.
5
Input & Volume Selection Area
This area is used to adjust the
audio sources in the chosen
output zone.
6
Volume +/- Buttons
Use these buttons to make fine
adjustments to level control.
7
Volume Slider
Touch and slide the volume of
a chosen audio source up and
down as desired.
8
Mute/On/Off Selector
Switches an audio source on or
off for the chosen output zone.
Volume will display at last
used setting.
9
Audio Source Name
The name of the audio source.
14
Redback® Proudly Made In Australia
Zone Selection
1
FUNCTN RM1
RESTAURANT
2
DAB RADIO : 50%
DAB RADIO : OFF
FOXTEL : 45%
ROCK RADIO : 67%
ROCK RADIO : OFF
RADIO MIC : OFF
RADIO MIC : OFF
GARDEN
DAB RADIO : 55%
DAB RADIO : OFF
FOXTEL : OFF
ROCK RADIO : OFF
ROCK RADIO : 50%
RADIO MIC : 25%
RADIO MIC : 55%
SWITCH TO PAGING
3
Fig 9. Console in Master Wallplate mode. A 4450 in Matrix Mode.
Zone Selection
1
2
FAMILY
DAB RADIO : 50%
DAB RADIO 2 : 50%
KITCHEN
FOXTEL : 100%
MP3 PLAYER
Mute Active
SWITCH TO PAGING
3
Fig 10. Console in Master Wallplate mode. A 4450 in Switcher Mode.
FUNCTN RM1
Input & Volume Selection
DAB RADIO
Vol+
FOXTEL : 43%
Vol
Vol-
50%
On
LOUNGE
ROCK RADIO
Vol+
FOXTEL : OFF
Vol
67%
Vol-
On
DINING
Input Selection
DINING
DAB RADIO
FOXTEL
PATIO
Volume Control
Vol
50%
www.redbackaudio.com.au
4
5
FOXTEL
6
Vol+
7
Vol
Vol-
45%
8
On
9
RADIO MIC
Vol+
Vol
Vol-
43%
Off
4
5
9
DAB RADIO 2
MP3 PLAYER
Vol+
6
Vol-
7
Mute
8
OFF

Advertisement

Table of Contents
loading

Table of Contents