Table of Contents
Advertisement
8.0 A 4660 SETTINGS
The settings menu can be accessed using the icon on the top left of the screen. Once in this menu the following screen
will be displayed, which shows the various settings available.
8.1 A 4660 System Settings
The System settngs screen is shown in figure 11.
1
Audible Feedback - Allows you to enable/disable the audible feedback (in built speaker) on button presses and
set the volume. Press the button to enable/disable and use the slider below to adjust the feedback volume.
2
Restart unit - This will restart the A 4660.
3
Factory reset - This will reset the unit back to it's default settings. This option is also required to re-assign the
paging console address (Press the factory reset button, tap confirm and a prompt will appear for the units
address. Select the required address (which can be any number from 1-2). If any settings need saving before the
factory reset, use the Export Settings option below.
4
Export Settings - This feature allows the settings of the unit to be transferred to another unit or kept as a back
up. Simply insert a Micro Sd card into the unit and follow the prompts.
5
Import Settings - This feature allows the settings of the unit to be imported from another unit. Insert a Micro SD
card and follow the prompts.
www.redbackaudio.com.au
System
Backlight
Zone Lock
BGM Select
Fig 10 - Console Settings Screen.
1
2
Audible
Restart
Feebback
unit
ENABLED
Feedback Vol
0dB
Zone Lock
Fig 11 - System Settings Screen.
Redback® A 4469 Audio Switcher
PIN Access
Labels
Microphone
3
4
Factory
Export
Reset
Settings
Export & Import all settings
(except unit address)
to/from SD card
Back
5
Import
Settings
Back
Redback® Proudly Made In Australia 11
Advertisement
Table of Contents
