SolidRF MobileForce Manual page 7

Step3: Outside Antenna Installation
Determine where you want to have the outside antenna on your vehicle. Same time you
need determine where you want the cable to enter the vehicle.
NOTE: With two options
Option A: Enter the car through the back
door
There is a powerful magnet at the bottom of the outside antenna, which can attract the
device to the surface of ferrous materials.
Make sure that the outside antenna is horizontally attached to the roof.
If the roof is not made of iron, please
stick the iron sticker supplied by us on
the roof.
Option B: Enter the car through the
trunk and pass through the rear seats
7