Product Care; Maintenance Schedule - Cub Cadet Pro Z SurePath Auto Steer Series Operator's Manual

Zero-turn commercial mower
Table of Contents

Advertisement

Available languages

Available languages

MAINTENANCE SCHEDULE

Before performing any type of maintenance/service, disengage all controls
and stop the engine. Wait until all moving parts have come to a complete
stop. Disconnect the spark plug wire(s) and negative battery cable to
prevent unintended starting. Always wear safety glasses during operation
or while performing any adjustments or repairs.
Check Gasoline Level
Check Hydraulic Hoses for Leaks
Check Tires & Tire Pressure
Check Deck, Mower & Hydro Drive Belts
Check Blades & Blade Bolt Tightness
Check Safety Switches for Proper Operation
Check Fluid Level in Transmission Oil Expansion Reservoir
Check/Clean Engine Intake Screens & Cooling Fans *
Check/Clean Exhaust Manifold, Muffler Pipe & Muffler Shields *
Check/Clean Top & Underside of Deck, Under & Around Spindle Covers & Belt Area *
Check/Clean Around Fuses, Wiring & Wiring Harnesses *
Check/Clean Around Transmission, Axle & Fans *
Blow Out/Clean Pump Control Area Under Floor Pan
Blow Out/Clean Pedal Control Area Under Foot Rest
Lubricate Wear Points (see chart)
Clean Engine Cooling Fins & External Surfaces *
Change Hydrostatic Fluid & Filter in Transaxles †
† — After first 300 hours, change hydrostatic fluid and filter in transaxles
* — Perform more frequently under dusty conditions
NOTE: This Operator's Manual covers several models. Mower features may vary by
model. Not all features in this manual are applicable to all mower models and the
mower depicted may differ from yours.
Before performing any maintenance or repairs, disengage the PTO, move
the drive pedals to the neutral position engaging the parking brake, stop
the engine, and remove the key to prevent unintended starting.
POST-OPERATION MOWER CARE
After each operation of the mower, the following procedures should be implemented
to extend the life of your mower and ensure safe operating conditions.

PRODUCT CARE

PRODUCT CARE
WARNING
WARNING
Follow the Maintenance Schedule given below. This chart describes service
guidelines only.
Refer to the Engine Operator's Manual for engine maintenance items listed in the
table below.
Before Each Use
Every 50 Hours
Failure to follow these recommendations may result in serious injury to
yourself or others and may cause damage to the mower.
Cleaning the Underside of the Deck
Rinse grass clippings from the deck's underside and prevent the buildup of
corrosive chemicals.
Make certain the mower's discharge chute is directed AWAY from people,
your house, garage, parked cars, etc.
1.
Disengage the PTO, set the parking brake and stop the engine.
25
Every 500 Hours
After Mowing
DANGER
WARNING

Advertisement

Table of Contents
loading

Table of Contents