Table of Contents
Advertisement
1 P
-
RE
INSTALLATION
If a Micromeritics Service Technician performs this installation, additional charges
apply. Please see
Micromeritics.
This document describes how to prepare a site for installation of the Flex for both standard and 21
CFR Part 11 (Confirm) environments. If Micromeritics will be performing this installation, when the
enclosed procedures have been completed, return the signed and dated form to Micromeritics as
outlined in
Dates and Signatures — All Environments on page 6 -
of this document or the checklist, contact the Micromeritics Service Department for clarification.
The following chart indicates the applicable sections for your type of installation:
Section
Pre-installation Document Overview
Pre-installation Instructions on page 2 -
lyze the installation site.
Pre-installation Checklists on page 3 -
for the installation site.
Pre-installation Instructions — 21CFR11 Environments on page 4 -
tains information to help analyze the installation site for 21 CFR Part 11 envir-
onments.
Pre-installation Checklist — 21CFR11 Environments on page 5 -
tains questions and a checklist for the installation site for 21 CFR Part 11 envir-
onments.
Dates and Signatures — All Environments on page 6 -
Micromeritics will be performing this installation. Read this entire document
carefully. Complete all checklists. Sign and return the form in this section to
Micromeritics. Micromeritics will contact you to confirm an installation date.
Flex Series Pre-installation Instructions and Checklist
350-42870-01 (Rev H) — Apr 2021
D
OCUMENT
Contact Us on page iv
above.
1. Contains instructions to help ana-
1. Contains questions and a checklist
1 Pre-installation Document Overview
O
VERVIEW
for information on how to contact
1. If unsure about any part
1. Con-
1. Con-
1. For use when
Installation
Type
Cfr
Std
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
1 - 1
Advertisement
Table of Contents
Need help?
Do you have a question about the FLEX Series and is the answer not in the manual?
Questions and answers