Chapter 2 Installation
Cleaning
Terminal
The following configuration should be used in terminal emulation program:
z USB-A to Micro-B USB Cable to connect to computer USB port
z Port Settings: 115200 bps
z Data Bits: 8
z Parity: None
z Stop Bits: 1
z Flow Control: None
WARNING: The console connection is for temporary connection only.
Do not use, connect, or disconnect unless the area is known to be non-
hazardous. Connection or disconnection in an explosive atmosphere could
result in an explosion.
AVERTISSEMENT: La connection à la console est pour la connexion
temporaire seulement. Ne pas utiliser, connecter ou déconnecter sauf si la
zone est connue pour être non dangereuse. Connexion ou la déconnexion
dans une atmosphère explosive pourrait entraîner une explosion.
Cleaning
Clean only with a damp cloth. Excess moisture or harsh chemicals can cause damage to the unit.
42
Drawing No. LP1182
Revision A
NT5000 Gigabit Managed
Ethernet Switches