Mounting Templates - Blue Sea Systems M2 Instructions Manual

MOUNTING TEMPLATES

Mounting Considerations
M2 Digital Meters have three mounting methods: Surface mount, Flat panel mount, and 360 panel mount. When surface mounted per instructions the
unit face is waterproof to IP66. Flat panel and 360 mounting systems are not waterproof. The unit should not be flat panel or 360 mounted if used in an
exposed location. For all mountings, the back of the unit is not waterproof and must be kept dry.
Flat Mount
M2 Flat
Head Mount
Unit Bezel
Surface Mount
Surface M2
Mount Head
Cover Unit
NOTE: During
installation use cover
to align the bezel
and gasket
Mounting
Ring and Nut
Clamp
Mounting
Substrate
Mounting
Ring and Nut
Surface
Mount Mounting
Substrate
Gasket
Surface
Mount
Bezel
and Seal
360 Panel Mount
PN 1525
STEP 1
Use 1/4"
Mounting
Screws
STEP 2
Snap header
and footer
into mounting
clips and post.
Snap the
mounting bezel
into place
with the flat
edge up.
Footer
STEP 3
Header
M2
Head Footer
Unit
360 Panel
Mount
Carrier
Panel
Frame
Header
Bezel
Panel
Frame
Mounting
Ring and Nut
Bezel Panel
Frame
13