Table of Contents
Advertisement
18
Sending Messages [2]
R e c o r d i n g
R e c o r d i n g a M e s s a g e
1.
Log on to PathFinder (refer to
2.
Press [2] to send a message.
3.
Record your message.
4.
After recording, select one of the following options.
[1] = Send
[2] = Hear/Review your message
[3] = Cancel
[4] = Append to (pick up at the end of what you have already
recorded)
[5] = Re-record (erase what you have already recorded and re-
record a new message from the beginning
S e n d i n g
After recording your message, you are ready to send it.
S e l e c t i n g a D e s t i n a t i o n
1.
To choose a destination for your message, select one of the
following address options:
a.
Enter a mailbox number, then press [#] to confirm mailbox
number,
-or-
b. Press [
[
] = A mailbox based on the spelling of the owner's name
.
[5] = A system list
[6] = A phone number outside your PathFinder system
[7] = A personal distribution list (refer to
Distribution Lists" on page
If you append or re-record your message, you must
press [1] to send the message before you can go on
to the next step.
] to select one of the other address options:
.
"Logging On" on page
"Personal
35)
Recording
3).
Advertisement
Table of Contents
