Table of Contents
Advertisement
14
Retrieving Messages [1]
If you elected to forward the message as is ... proceed to
Destination".
If you opted to attach your own preamble ... perform these steps:
1.
Record the preamble.
2.
Then choose from the following options:
[1] = Continue
[2] = Hear preamble
[3] = Cancel preamble
[4] = Re-record preamble
3.
After you finish editing a preamble, press [1] to continue.
S e l e c t i n g a D e s t i n a t i o n
After adding any preambles, you must then select a destination.
PathFinder will allow you to forward a message either to a known
mailbox number or to another destination (a guest mailbox,
distribution list, outside number, or unknown mailbox number).
To forward a message to a known mailbox number:
Enter the mailbox number and press [#] to confirm the entry.
To forward a message to an unknown mailbox number, or to
select another type of address:
1.
Press [
] and choose one of the following forward options:
.
[
] = Forward to a mailbox based on the spelling of the mailbox
.
owner's name
[5] = Forward to a system list
[6] = Forward to an outside telephone number
[7] = Forward to a personal distribution list (refer to
Distribution Lists" on page
2.
After selecting the forwarding destination, press [#] to confirm.
35)
Forwarding Messages
"Selecting a
"Personal
Advertisement
Table of Contents
