Table of Contents
Advertisement
FRDM-KW24D512 development board
•
FXOS8700 Combo Sensor
Figure 2
shows the main board features and I/O headers for the Freescale FRDM-KW24D512 board.
OpenLink debug
3.3
Software and driver considerations
The FRDM-KW24D512 board includes an OpenSDAv2.1, a serial and debug adapter circuit that includes
an open-source bootloader, and debug interface software. It bridges serial and debug communications
between a USB host and an embedded target processor. The hardware circuit is based on the Kinetis K20
family. More information is provided in the following document:
•
USBKW24D512 Quick Start Guide, found at the Freescale website under "Downloads"
(FRDM-KW24D512)
For additional information about our 2.4 GHz Kinetis family platforms, refer to the following:
•
Freescale.com/wireless
•
FRDM-OSDAUG - OpenSDA User's Guide (OPENSDAUG)
•
KW2x
on freescale.com
4
FRDM-KW24D512 development board
4.1
FRDM-KW24D512 board overview
The FRDM-KW24D512 is an evaluation board based on the Freescale MKW24D512 transceiver. The
FRDM-KW24D512 board provides a platform to evaluate the MKW24D512 transceiver, develop
Freescale Freedom Development Board FRDM-KW24D512 User's Guide, Rev. 0, 10/2015
6
External flash
memory
J1 I/O header
Combo sensor
RGB LED
J2 I/O header
SW 1 - 2
OpenLink USB
Figure 2. FRDM-KW24D512 components and I/O headers
Printed F
antenna
J4 I/O header
MKW24D512
32 kHz Crystal
KW24 SWD
J3 I/O header
Reset
SW 3 - 4
KW24 USB
Freescale Semiconductor, Inc.
Advertisement
Table of Contents
