Table of Contents
Advertisement
1.2.2 USB connection
Only an appropriate USB connection allows error-free operation of CAL3. Use delivered USB cables. If
you need to extend the USB connection to longer distances, please check if powered hubs/repeaters
are necessary.
1.3
General safety information
WARNING!
Some LEDs emit invisible light in the IR and UV near range.
•
Do not look directly into the emitted light or the optical LED system.
•
Do not look directly in the open sphere or light source when using high intensities or
sequences with low response time.
•
Do not open the device without instructions from the Image Engineering support team
or when connected to the power supply.
2 GETTING STARTED
2.1
Scope of delivery
•
Integrating sphere
•
Spectrometer (built-in)
•
Power cord
•
USB cable
•
Control software
•
Calibration protocol
Optional equipment:
•
iQ-Align for CAL3 for a quick and easy camera alignment.
•
EX2 spectrometer for external measurements.
Image Engineering
iQ-Align for CAL3
Seite 4 von 12
Advertisement
Table of Contents
Need help?
Do you have a question about the CAL3 and is the answer not in the manual?
Questions and answers