Table of Contents
Advertisement
Safety
2.1 Symbol explanation
Safety instructions
The safety notes in these operating instructions are high-
lightet by symbols. The safety notes are introduced by si-
gnal words which express the concern of the risk.
DANGER!
This combination of symbol and signal words indi-
cates an imminently dangerous situation which may
lead to death or severe injuries if they are not
avoided.
WARNING!
This combination of symbol and signal words indi-
cates a possibly dangerous situation which may lead
to death or severe injuries if they are not avoided.
ATTENTION!
This combination of symbol and signal word indicates
a possibly dangerous situation which may result mild
or minor injuries.
NOTE!
This combination of symbol and signal words indi-
cates a possibly dangerous situation which may lead
to property and environmental damages if they are
not avoided.
Tips and recommendations
Tips and recommendations
This symbol highlights useful tips and recommenda-
tions as well as information for an efficient and trou-
ble-free operation.
It is necessary to observe the safety notes written in
these operating instructions in order to reduce the risk of
personal injuries and damages to property.
4
2.2 Responsibility of the operator
The operator is the person who operates the machine for
commercial or economic purposes himself or leaves it to
a third for use or application and bears the legal product
responsibility for the protection of the user, personnel or
third during operation.
If the Part Washing Unit is used for commercial pur-
poses, the operating company of the Part Washing Unit-
must comply with the legal working safety regulations.
Therefore, the safety notes in this operating manual, as
well as the safety, accident prevention and environment
protection regulations applying for the area of application
of the Part Washing Unit must be met. The following ap-
plies in particular:
- The operating company must be informed about
the applying industrial safety regulations and fur-
ther analyse hazards resulting from the special
working conditions at the place of use Part Wash-
ing Unit. She must implement these in form of op-
erating manuals for the operation of thePart Wash-
ing Unit.
- During the entire lifetime of the Part Washing Unit,
the operating company must verify whether the op-
erating manuals prepared by her correspond to the
current status of the regulations, and must adapt
these if necessary.
- The operating company must unambiguously regu-
late and determine the responsibilities for installa-
tion, operation, troubleshooting, maintenance and
cleaning.
- The operating company must ensure that all per-
sons who work with the Part Washing Unit, have
read and understood this manual. Furthermore she
must instruct the staff in regular intervals and in-
form them about the hazards.
- The operator must provide the necessary protec-
tive equipment to the staff and order the use of the
necessary protective equipment in a binding way.
Furthermore the operating company is responsible to
keep the Part Washing Unit always in a technically flaw-
less state. Thus, the following applies:
- The operator must ensure that the maintenance in-
tervals described in this manual are kept.
- The operator must have all safety devices checked
regularly for their good working order and their in-
tegrity.
TWG 1 | Version 1.02
Advertisement
Table of Contents
