Table of Contents
Advertisement
Disposal, Recycling of used devices
10 Disposal, Recycling of used devices
In your own interests an in the interests of the eviron-
ment, please ensure that all components of the equip-
ment are disposed of in the proper and authorized way.
10.1 Decommission
Disused devices must be taken out of service immedi-
ately in order to avoid later misuse and endangering the
environment or people.
Step 1:
Remove all environmentally hazardous fluids
from the Part Washing Unit.
Step 2:
If necessary, disassemble the Part Washing
Unit into manageable and usable assemblies
and components.
Step 3: The product components and operating materi-
als must be routed through the appropriate dis-
posal routes.
10.2 Disposal of lubricants
Remove any excess, leaking or used grease from the lu-
bricated lubrication points.
The disposal instructions for the used lubricants are pro-
vided by the lubricant manufacturer. If necessary, ask for
the product-specific data sheets.
11 Spare parts
DANGER!
Risk of injury through use wrong
spare parts!
The use of incorrect or faulty replacement parts may
cause danger to the operator and cause damage and
malfunction.
- Only original spare parts from the manufacturer or
replacement parts approved by the manufacturer
must be used.
- In case of doubt, always contact the manufacturer.
Tips and recommendations
Using non-approved spare parts voids the manu-
facturer's warranty.
12
11.1 Ordering spare parts
The spare parts can be obtained from the dealer or di-
rectly from the manufacturer. The contact details are in
chapter 1.2 Customer Service.
Specify the following key data when inquiring or ordering
spare parts:
- device type
- item number
- Position number
- Construction year
- amount
- desired shipping method (post, freight, sea, air, ex-
press)
- delivery address
Spare parts orders without details given above can not
be considered. If the shipping method is missing, ship-
ping will be at the discretion of the supplier.
Details of the device type, article number and year of
construction can be found on the type plate, which is at-
tached to the Part Washing Unit.
Example
The tank for the Part Washing Unit TWG 1 must be or-
dered. The tank has the number 1 in the spare parts dra-
wing 1.
By ordering spare parts, send a copy of the spare parts
drawing (1) with the marked part (tank) and marked
positon number (1) to the dealer or spare parts depart-
ment and provide the following information:
- Type of device: Part Washing Unit TWG 1
- Item number: 6220001
- Drawing number: 1
- Position number: 1
The item number of your device:
Part Washing Unit TWG 1: 6220001
TWG 1 | Version 1.02
Advertisement
Table of Contents
