Table of Contents
Advertisement
1
Introduction
You have made a good choice by purchasing the UNI-
CRAFT Sandblasting Cabinet.
Read the operating manual thoroughly before commissioning
the machine.
It gives you information about the proper commissioning,
intended use and safe and efficient operation and main-
tenance of your sandblasting cabinet.
The operating manual is part of the Sandblasting Cabi-
net. Always keep this operating manual in the location
where your Sandblasting Cabinet is being operated. All
local accident prevention regulations and general safety
instructions for the operating range of your Sandblasting
Cabinet must also be complied with.
1.1 Copyright
The contents of these instructions are copyright. They
may be used in conjunction with the operation of the
Sandblasting Cabinet. Any application beyond those de-
scribed is not permitted without the written approval of
Stürmer GmbH.
We are claiming branded-, patent and design rights to
protect our products, if this is possible in individual
cases. We vigorously oppose any infringement of our in-
tellectual property.
1.2 Customer service
Please contact your dealer if you have questions con-
cerning your product or if you need technical advice.
They will help you with specialist information and expert
advice.
Germany:
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
Repair service:
Hotline:
0049 (0) 900 19 68 220
(0.49 € if calling from the German fixed
network)
Fax:
0049 (0) 951 96555-111
Email:
service@stuermer-maschinen.de
Spare part orders:
Fax:
0049 (0) 951 96555-119
Email:
ersatzteile@stuermer-maschinen.de
SSK 4 | Version 1.08
We are always interested in valuable experience and
knowledge gained from using the application-which then
could be shared and be valuable to develop our products
even further.
1.3 Limitation of liability
All information and notes in these operating instructions
were summarised while taking applicable standards and
rules, the state-of-the-art technology and our long-term
knowledge and experiences into consideration.
In the following cases the manufacturer is not liable for
damages:
- Non-observance of the operating instructions,
- Inappropriate use
- Use of untrained staff,
- unauthorised modifications
- technical changes,
- Use of not allowed spare parts.
The actual scope of delivery may deviate from the expla-
nations and presentations described here in case of spe-
cial models, when using additional ordering options or
due to latest technical modifications.
The actual scope of delivery may deviate from the expla-
nations and presentations described here in case of spe-
cial models, when using additional ordering options or
due to latest technical modifications.
2
Safety
This section provides an overview of all important safety
packages for the protection of operating personnel as
well as for safe and fault-free operation. Other task-
based safety notes are included in the paragraphs of the
individual phases of life.
2.1 Symbol explanation
Safety instructions
The safety notes in these operating instructions are high-
lighted by symbols. The safety notes are introduced by
signal words which express the concern of the risk.
DANGER!
This combination of symbol and signal words indi-
cates an imminently dangerous situation which may
lead to death or severe injuries if they are not
avoided.
Introduction
3
Advertisement
Table of Contents
