Table of Contents
Advertisement
4
Technical Data
Model
Length
Width / Depth
Height
Weight
Electrical voltage
Working pressure
Power frequency
Length of workspace
Volume flow
cleaning supplies
Width /Depth Workspace
Heigth of workspace
max. Tank capacity
min. Content of detergent
tank
max. Content of deter-
gent tank
Fig. 3: Dimensions Part Washing Unit TWG 1
5
Transport, Packaging, Storage
Delivery
Check the Part Washing Unit for visible transport da-
mage after delivery. If you discover any damage, imme-
diately report it to the transport company or the dealer.
Transport
NOTE!
Observe the weight of the device during transport and
lifting. The transport and lifting equipment must be
able to pick up the load
TWG 1 | Version 1.02
TWG 1
785 mm
595 mm
700 mm
29,5 kg
230 V
5 bis 8 bar
50 Hz
736 mm
0,8 l/min
560 mm
450 mm
140 L
4 L
9 L
NOTE!
Protect the device from moisture
The parts washing device may only be transported
upright. The parts washing device must not be stacked
on top of each other. Also, no other items may be placed
on it.
For transport, the parts washing device is located on a
pallet. The pallet must be secured properly in the loading
area.
To protect against moisture and dirt, all bare metal parts
are greased.
Tips and recommendations
For longer transports, make sure that the corrosion
protection is intact or renewed if necessary.
NOTE!
The device may never be stored or transported in a
horizontal position or filled!
Transport with a forklift / pallet truck:
For transport with a sufficiently dimensioned pallet truck
or forklift, the parts washer must be secured on a flat,
firm surface (for example, on a pallet) with bolts.
Packaging
All used packaging materials and packaging aids are re-
cyclable and should be taken to a materials recycling de-
pot to be disposed of.
The delivery packaging is made of cardboard, so please
dispose carefully by having it chopped up and given to
the recycling collection.
The film is made of polyethylene (PE) and the cushioned
parts of polystyrene (PS). These materials should be
taken to a collection point for recyclable materials or to
the local waste disposal company.
Storage
The parts washer must be thoroughly cleaned before
storing in a dry, clean, and frost-free environment. Never
store the device filled.
Technical Data
7
Advertisement
Table of Contents
