Table of Contents
Advertisement
Description of Device
6
Description of Device
Illustrations in this manual may differ from the origi-
nal.
7
6
5
Fig. 4: Part Washing Unit
1 View window
2 Fan
3 Pneumatic cleaning gun
4 ON / OFF Switch
5 Filling container
6 Cleaning grid
7 Protective gloves
6.1 Equipment
- Cleaning and blow-out gun
Item number: 6231000
- Fluorescent tube
Item number: 6231001
- View window
Item number: 6231002
- Gloves
Item number: 6231003
- Universal cleaning agent UR-Spezial 10l alkaline
with pH value of 12
Item number: 7321910
8
7
The Part Washing Unit may only be set up and operated
in dry, well-ventilated rooms.
It must be set up stable on a level and firm ground.
It is important to ensure that there is enough freedom of
movement and sufficient lighting to work
1
2
3
4
Incorrect work during assembly of the parts washing
machine can cause injury to fingers and hands.
- Note the weight of the parts washing device. Pay at-
7.1 Assembly
The Part Washing Unit must be mounted according to
Fig. 5 or. Fig. 12.
Step 1: Remove any loose parts from inside the body of
Step 2: Put the housing on its side.
Step 3: Screw the four feet to the housing with the enclo-
Step 4: Place the parts washing machine on its feet.
Step 5: Insert Cleaning tank.
Step 6: Connect the suction pipe Ø 12 with adapter on
Step 7: Tighten all screws and nuts.
Assembly, Set up and Connecting
Wear safety goggles
Wear safety glooves!
Wear protective boots!
Wear protective clothing!
ATTENTION!
crushing!
tention to stable supports and support devices.
the parts washer.
sed screws (M8x16), spacers and nuts.
the side of the cleaning tank.
TWG 1 | Version 1.02
Advertisement
Table of Contents
