User Safety; Operation; Introduction; Initial Inspection - OPTILAB TWL-C-M Series User Manual

TWL-C-M User's Manual

1.4. User Safety

1. The TWL-C-M unit uses high intensity invisible light from the optical output
receptacle. Avoid direct exposure to skin and eyes.
2. The equipment case is fully certified for EMS protection. The user should never
open the equipment case; any attempt will void the warranty and may result in
electric shock and EMS attack to equipment in the vicinity.
3. The user should avoid using any solvent or vaporizing chemical to clean the
equipment panel or case. It may result in damage to the surface and internal
circuits.

2. Operation

2.1. Introduction

This chapter describes how to operate the TWL-C-M unit, and discusses the location
and function of the controls and connectors.

2.2. Initial Inspection

Your TWL-C-M unit was carefully inspected before it left the manufacturer. It should
be in proper working order upon receipt. You should, however, inspect the unit for
any damage that may have occurred in transit. If the shipping container or the
packing material is damaged, keep it until the contents of the shipment have been
checked to be free of mechanical and electrical damages.
promptly if any notable damage is found.
Each TWL-C-M shipment should include the following:
• TWL-C-M module unit
• User Manual
• Test Datasheet
• AC/DC Power Supply with Power Cords
• USB Cable
Optilab, LLC
600 E. Camelback Road, Phoenix, AZ 85012
Phone: (602) 343-1496, Fax: (602) 343-1489, Email: sales@oequest.com
Page 2 of 16
Notify Optilab, LLC