Table of Contents
Advertisement
Quick Links
Optilab TWL-P-HS User's Manual
High Speed Tunable Wavelength Laser – Phoenix Series
Caution: The user must read this manual before operating the SOA-M unit. Operations
other than those described in this manual may result in personal injury and
damage to the unit.
Note that any attempt to open or fix the equipment without prior approval by
Optilab, LLC. voids the warranty.
Ver. 1.2
th
August 12
, 2021
Advertisement
Table of Contents
Related Manuals for OPTILAB Phoenix Series
Summary of Contents for OPTILAB Phoenix Series
- Page 1 Optilab TWL-P-HS User’s Manual High Speed Tunable Wavelength Laser – Phoenix Series Caution: The user must read this manual before operating the SOA-M unit. Operations other than those described in this manual may result in personal injury and damage to the unit.
- Page 2 Copyright © 2021 by Optilab, LLC All rights reserved. This document is copyrighted property of Optilab, LLC. It may not be used in whole or in part for manufacture, sale, or design of items without the written permission of Optilab, LLC.
-
Page 3: Table Of Contents
TABLE 1. ITU GRID CHANNEL SPACING 3. TROUBLESHOOTING 4. SERVICE AND SUPPORT 4.1 W ARRANTY 4.2 S ERVICE AND ALIBRATION 4.3 C ARE OF IBER OPTIC ONNECTORS Optilab, LLC 600 E. Camelback Road, Phoenix, AZ 85012 Phone: (602) 343-1496, Fax: (602) 343-1489, Email: sales@oequest.com... -
Page 4: General Information
EMS attack to equipment in the vicinity. If requesting to open up the unit for demonstration purposes, please contact Optilab prior to doing so. 3. The user should avoid using any solvent or vaporizing chemical to clean the equipment panel or case. -
Page 5: Operation
If the shipping container or the packing material is damaged, keep it until the contents of the shipment have been checked to be free of mechanical and electrical damages. Notify Optilab, LLC promptly if any notable damage is found. -
Page 6: Controls
This USB port is used to communicate with the TWL-P-HS unit and is not necessary for normal operation. Please USB P contact Optilab if you wish to know more about this communication port. This +/- 5VDC connection port is used to connect to the +/- +/- 5 VDC 5VDC power supply to power up the TWL-P-HS unit. -
Page 7: Operation Instructions
2. The continuous wave mode page is displayed as shown below. 3. Set the LD current (1) and Channel Number (2) to achieve desired power and ITU grid wavelength. Optilab, LLC 600 E. Camelback Road, Phoenix, AZ 85012 Phone: (602) 343-1496, Fax: (602) 343-1489, Email: sales@oequest.com... -
Page 8: Sweep Mode
4. Set the Sweep Time (3). This will determine the period of time it takes to sweep from start channel to stop channel. 5. Set the LD Current (4). This will determine the optical output power. Optilab, LLC 600 E. Camelback Road, Phoenix, AZ 85012 Phone: (602) 343-1496, Fax: (602) 343-1489, Email: sales@oequest.com... - Page 9 WITCH 100GHz spacing. UTTON Starts/stops the sweep operation. TART UTTON This button will lead you back to the Main page. UTTON Optilab, LLC 600 E. Camelback Road, Phoenix, AZ 85012 Phone: (602) 343-1496, Fax: (602) 343-1489, Email: sales@oequest.com...
-
Page 10: Shutdown Procedure
By using the supplied USB port on the side panels, the user can then monitor and control the TWL-P-HS through a software interface on the PC. For more information, please contact Optilab for details. Optilab, LLC 600 E. Camelback Road, Phoenix, AZ 85012... - Page 11 1549.622 1560.104 1569.918 1538.492 1550.025 1560.511 1570.328 1538.884 1550.426 1560.919 1570.741 1539.281 1551.229 1561.325 1571.154 1539.677 1551.631 1561.730 1571.567 1540.073 1552.033 1562.135 1572.370 Optilab, LLC 600 E. Camelback Road, Phoenix, AZ 85012 Phone: (602) 343-1496, Fax: (602) 343-1489, Email: sales@oequest.com...
-
Page 12: Troubleshooting
HIGH ENOUGH S: Measure optical output power with power meter and compare with original test data. Return to Optilab for repair if the difference is high (>4 dB) and cannot be corrected by cleaning or replacing the optical connectors. Always apply dust cover plugs to unused optical receptacles to prevent the damage of internal optical connectors. -
Page 13: Service And Support
5. Service and Support 5.1. Warranty Optilab, LLC guarantees its TWL-P-HS to be free of defects for 1 year from the date of shipment. The guarantee does not cover any damages resulting from the misuse or improper handling of the equipment, or any incidental or consequential loss. -
Page 14: Care Of Fiber-Optic Connectors
5. Visually inspect the end face of the connector with an optical microscope to verify cleanliness. Clean end-face as needed. Optilab, LLC 600 E. Camelback Road, Phoenix, AZ 85012 Phone: (602) 343-1496, Fax: (602) 343-1489, Email: sales@oequest.com...