Table of Contents
Advertisement
Reference Manual
00809-0100-4052, Rev AA
There are three ways to set the Gateway time:
1.
2.
3.
Note
Network Time Protocol (NTP) is recommended for the best network performance because it
always adjusts time to match the network time server.
Figure 1-1. Time Settings
Initial Connection
Network Time Protocol (recommended).This option uses a Network Time Protocol
(NTP) server to slowly adjust the Gateway's time in order to match the time of the
control network. Enter the IP address for the NTP server and select the packet version
(1, 2, 3, or 4).
Set with PC Time. This option will match the Gateway's time to that of the PC/Laptop.
Manual Entry.This option allows the user to enter a specific date (MM:DD:YY) and time
(HH:MM:SS).
Section 1: Initial Connection
April 2015
5
Advertisement
Table of Contents
