Table of Contents
Advertisement
Section 1: Initial Connection
April 2015
Security passwords
There are four role based user accounts for the gateway with varying levels of access. The table
below describes this access.
Executive
Operator
Maintenance
Administrator
Each of the initial passwords for the user accounts is default. It is recommended, for security
purposes, that these passwords are changed. The administrator password should be
appropriately noted when changed. If it is lost, please contact Emerson Process Management for
technical support.
To change the User Accounts Passwords:
1.
2.
3.
Note
It is suggested that the default security settings in System Settings>Users>User Accounts be
changed to the local IT best practices or the "Normal" setting after initial login. Strong or
custom settings are available for more robust passwords. For more information on this screen
and others please see the User Interface Terminology Guide (00809-0600-4420).
Time settings
The Gateway is the timekeeper for the WirelessHART network, so it is imperative that the
Gateway's time is accurate for timestamp data to be meaningful. Time settings can be found by
navigating to System Settings>Time.
4
Role
User name
exec
oper
maint
admin
Navigate to System Settings>Users>User Accounts.
Set the new password for each role based user account, and confirm.
Select Submit.
Web interface access
Read-only access
Read-only access
®
Configure HART
device settings
Configure Modbus communications
Configure Modbus register mapping
Configure OPC browse tree
Configure Active Advertising
Includes all maintenance privileges
Configure Ethernet network settings
®
Configure WirelessHART
network settings
Set passwords
Set time settings
Set home page options
Configure custom point pages
Restart applications
Reference Manual
00809-0100-4052, Rev AA
Initial Connection
Advertisement
Table of Contents
