Table of Contents
Advertisement
Section 4: DeltaV Ready
April 2015
4.4
Setup
Out of the box the Smart Wireless Gateway is pre-configured for use on the DeltaV control
network. In the DeltaV Explore application, the Gateway will automatically appear in the
Decommissioned Nodes folder.
To setup a wireless network will require 3 steps:
1.
2.
3.
Figure 4-1. Decommissioned Nodes Folder within DeltaV Explorer
Commission the Gateway using the following procedure:
1.
2.
3.
4.
5.
At this time the Reconcile I/O window will appear. The purpose of this screen is to assign
WirelessHART devices to DeltaV I/O channel. This allows the wireless device to be referenced in
other DeltaV applications like Control Studio.
22
Commission the Gateway.
Assign wireless device tags.
Assign Gateway to controller and download.
Select START>PROGRAMS>DELTAV>ENGINEERING> DELTAV EXPLORE to launch the
DeltaV Explorer application.
Expand the folder SYSTEM CONFIGURATION >PHYSICAL
NETWORK>DECOMMISSIONED NODES.
Right click on the Smart Wireless Gateway and select Commission.
Enter a name for the Gateway and select OK.
Select YES when prompted to Auto-Sense Wireless Gateway.
Reference Manual
00809-0100-4052, Rev AA
™
DeltaV
Ready
Advertisement
Table of Contents
