Safety Information - Cisco ONS 15216-MD-40-ODD Install Manual

Introduction

Safety Information

Laser Radiation Emission Restrictions
Warning
Installing the Cisco ONS 15216-MD-40-ODD and 15216-MD-40-EVEN Mux/Demux Patch Panels
2
The patch panel can combine 40-channels of ITU wavelengths spaced at 100 GHz
to a denser DWDM signal and separate the combined signal to 40-channels of ITU
wavelengths spaced at 100 GHz. To increase the network capacity, the patch panel
is plugged with an interleaver and deinterleaver module and is used along with
another patch panel of a different grid. The interleaver module combines the
signals from the 15216-MD-40-ODD and 15216-MD-40-EVEN patch panels
spaced at 100 GHz to a denser DWDM signal spaced at 50 GHz and the
deinterleaver module splits the combined signal (80 channel signal) to the
15216-MD-40-ODD and 15216-MD-40-EVEN patch panels in the opposite
direction.
For installing the interleaver and deinterleaver module, refer to the "Installing
Cisco ONS 15216-MD-ID-50 Optical Interleaver and Deinterleaver Pluggable"
guide.
Before you install, operate, or service the Cisco ONS 15216 100 GHz 40-channel
mux/demux odd and even patch panels, you must read the
and Safety Information for Cisco Optical Transport Products
important safety information and warning translations.
The Cisco ONS 15216-MD-40-ODD and Cisco ONS 15216-MD-40-EVEN
patch panels are compliant with the GR 1089, UL60950 /CSA 22.2 No. 60950-00,
and IEC 60950 standards.
The Class 1M Laser safety and warning label is affixed to the
Cisco ONS 15216-MD-40-ODD and Cisco ONS 15216-MD-40-EVEN patch
panels and indicates that the product should never be used or installed in an
optical network with emissions higher than Class 1M.
Class 1M laser radiation when open. Do not view directly with optical
instruments. Statement 281
Regulatory Compliance
document for
78-19053-01