APRILIA ETX 150 Service Station Manual page 166

Bodywork
•
Partially extract the battery to have an
easy access to the terminals.
•
Move the rubber cap (3) that protects
the positive clamp (+).
•
Undo and remove the screw (4) of the
positive terminal (+).
•
Move the rubber cap (5) that protects
the negative clamp (-).
•
Undo and remove the screw (6) of the
negative terminal (-).
•
Hold the battery firmly and remove it
from its seat.
•
Put the battery away on a level surface,
in a cool and dry place.
PAY MAXIMUM ATTENTION AND PREVENT ALL CON-
TACT BETWEEN THE BATTERY POLES AND ANY METAL
OBJECT TO PREVENT THE RISK OF SHORT-CIRCUITS.
Tail guard
TAIL FAIRING REMOVAL
•
Remove the rear grab handles
•
Remove the fixing screws (1) of the
rear light assembly cover (2) and re-
move it
BODYW - 166
ETX - STX 150