Two notes Audio Engineering ReVolt Guitar User Manual page 16

3-channel all-analog guitar amp simulator
Table of Contents

Advertisement

Last update:
2022/12/12
revolt_guitar:revolt_guitar_user_s_manual https://wiki.two-notes.com/doku.php?id=revolt_guitar:revolt_guitar_user_s_manual
14:25
This menu page allows the user to configure the Boost state and Boost behavior per channel. Two
independent modes are available: BOOST DEFAULT and BOOST MEMO. If the user toggles the 4CM
switch it changes between the two modes.
4.1 BOOST DEFAULT MODE
Note, this is an option for how ReVolt Guitar's boost behaves. Users can either choose Boost Default
Mode or Boost Memo Mode. Boost Default Mode sets the default state of each channel - e.g. boost on
or off from power-up. Within this mode, the Channel LED is on if the boost is active when entering the
channel. If off, the boost is inactive. Press the corresponding footswitch to toggle the default boost
state for each channel.
4.2 BOOST MEMO MODE
Using this mode allows the user to configure the default boost state on a per channel basis; once
configured, when returning ReVolt to normal operation (by rebooting the device), the boost status will
be memorized on a per-channel basis. Upon entering this mode, all the LEDs on ReVolt Guitar will
blink at the same time.
If the boost memo mode is selected, and when ReVolt is returned to normal operation, if the boost is
set to on for a specific channel, it will stay set for this channel until deactivated.
5. BOOST CC Number
Please note, by default ReVolt's Guitars default Boost CC is set to 15.
Using this menu allows the user to configure the default boost MIDI CC number. The CC number is
displayed and incremented in the same manner that the MIDI PC number is actioned. For further
details, please see the "PC Number" section.
Top Tip: If attempting to assign a CC number that has already been assigned, all LEDs will blink and
ReVolt will automatically default to the next available MIDI CC number.
6. FX Loop
6.1 Default State
Please note, by default ReVolt's default FX Loop State is set to All On.
https://wiki.two-notes.com/
Printed on 2022/12/12 19:40

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ReVolt Guitar and is the answer not in the manual?

Table of Contents