Function And Operation; Operation Panel; Temperature Control - Midea UR-JC46GE-FR Service Manual

9. Function and operation

9.1operation panel

9.2Temperature control

UI Control
●Powering on each time, the display screen gives a full display for 3s and meanwhile the
start-up sound rings; then the machine enters into operation in the locked state.●The
corresponding fault code will be displayed when a fault occurs; the setting temperature of
the corresponding chamber will be displayed when no fault occurs.●If no key operation for
30 seconds, the display screen will be turnoff and the cooler will operate in locked state. The
display screen will turn on again, if you touch any key.
Locked and unlocked mode
●By pressing the button
locked mode is activated; the temperature display areas (digit display areas) of upper
chamber and lower chamber stop flashing.●By pressing the button
mode, the buzzer rings and the unlocked mode is activated; After unlocking, the temperature
display area of selected chamber flashes.
●In the locked mode touch any key besides light key
flashing for 2.5s and the buzzer alerting to unlock the UI.
Lighting mode
●After power on for 3s, the lighting turns on by default for 30s. If the lighting key is
not operated within 30s, the lighting shall automatically turn off. ●Press the Lighting mode
key to turn on or turn off the light.
Switching of the Fahrenheit temperature and Celsius temperature
●Press the Temperature-rise key
time for 3s to finish the switch of the Celsius temperature and Fahrenheit temperature; the
screen will display the Fahrenheit temperature or Celsius temperature under the current
mode.
for 3s in the non-locking mode, the buzzer rings and the
and the Temperature-drop key
Service Manual, 2016-12
for 3s in the locked
, the display screen will keep
at the same
24 / 37