Table of Contents
Advertisement
Installation & Set-up Guide
Step 3 – Printing to the Laser System (Using the Materials Database Tab)
1. Verify that the Universal Control Panel (UCP) is running in the taskbar by looking for the
square red icon.
2. When you are ready to print the job, select PRINT
from the CorelDRAW FILE menu. Make sure that
your laser system printer driver appears in the
DESTINATION NAME dropdown list, and then
click PROPERTIES (Figure 4) to display your laser
system printer driver settings (Figure 5).
3. Choose your material category, in this case metal,
and then select the desired material: Aluminum
Anodized (Figure 5).
4. Set the Fixture Type to NONE.
Note: If you were using an optional accessory
or custom fixture, you would choose it from the
fixture list.
5. Measure the thickness of the material (a digital
calipers is recommended for this task) and
enter it into the material thickness field. In
this example, the provided test card is 0.019"
(0.483 mm) thick.
6. Click OK when done.
7. Now click on PRINT in the Print dialog window
(Figure 4).
8. Launch the UCP by selecting the square red UCP
icon on the taskbar and the current print job will
appear in the Viewer Tab of the Universal Control
Panel (Figure 6).
9. Now select the System Tab and verify that the
Auto Z box is checked.
10. Return to the Viewer Tab and proceed to the next
step.
20
Figure 4
Figure 5
Figure 6
Advertisement
Table of Contents
