Assembling Your System - Universal Laser Systems VLS2.30 Setup Manual

Step 3: Assembling and Connecting Your Laser System
Familiarize yourself with the instructions before getting started.
The final step in installation is to assemble your laser system, install the laser cartridge, make final
connections and perform a beam alignment check. Do not power up your laser system until the final
step, "Checking Beam Alignment.
Exhaust Air Filtration Unit Assembly (Optional)
1. Unpack the air filtration unit and place it on a level surface.
2. Push down on the tabs of the locking casters so that the cart does not roll.
3. Unpack the laser system.
4. With the assistance of another person, lift the laser system and place it on top of the
air filtration unit so that the feet of the laser system rest within the four depressions
on top of the air filtration unit.
"

Assembling Your System

13