Using Your Remote Control; Arming The Security System; Passive Arming Bypass; Bypassing The Shock Sensor - Code Alarm Professional Series CA 1050 Owner's Manual

Using Your Remote Control

Arming the Security System

To arm the system, exit the vehicle, close all doors, then press the
parking lights will flash 2 times, indicating the system is armed, has locked the
doors (if equipped and connected) and activated the starter disable feature. The
LED status indicator will blink steadily, once per second.
NOTE: The system is defaulted with Silent Choice enabled, which requires a
second press of the
vehicle.

Passive Arming Bypass

If passive arming is enabled on your system, while the system is disarmed, press
2 times within 5 seconds, the system will respond with 1 chirp and the LED will
turn on. The security system will remain in this temporally bypassed state for as
long as you wish. To exit passive bypass, press the
will return to normal status.

Bypassing The Shock Sensor

To arm the system and ignore the shock sensor press
seconds press
NOTE: The system will only change the shock sensor setting for one arm cycle
and will be defaulted back to normal operation the next time the system is armed.

Hidden Alarm Function

Press the
hidden alarm function. The security system will arm with "Hidden Alarm Function"
in which the siren / horn will be silenced if the system is triggered.

Disarming the Security System

To disarm the system press the
indicating the system is disarmed and has unlocked the doors (if equipped and
connected).
NOTE: The system is defaulted with Silent Choice enabled, which requires a
second press of the
vehicle.
*Throughout this manual, 'press' refers to pressing for less than 1 second; 'press and hold' refers to pressing for more
than 2 seconds.
2009 Audiovox Electronics Corporation. All rights reserved.
button to activate an audible arming response from the
+ , the system will respond with 1 long chirp.
button first, within 3 seconds press the
button to activate an audible arming response from the
button. The parking lights will flash 1 time,
button. The
or button and the system
button, then within 5
button to activate the
3