Connecting The Power And Host Pc - ICPDAS tGW-700-T Series Quick Start Manual

1

Connecting the Power and Host PC

1)
Make sure your PC has workable network settings.
Disable or well configure your Windows firewall and Anti-Virus firewall
first, else the "Search Servers" on Chapter 5 may not work. (Please
contact with your system Administrator)
2)
Connect both the tGW-700-T and your PC to the same sub network or
the same Ethernet switch.
3)
Supply power (+12~+48 V
Technical support:
) to the tGW-700-T.
DC
service@icpdas.com P2