Advertisement
Connecting the Power and Host PC
1. Make sure your PC has workable network settings.
2. Disable or well configure your Windows firewall and anti-virus
firewall first, else the "Network Scan" on step 4, 5 and 6 may
not work. (Please contact with your system Administrator)
3. Check
Init/Run
switch if it is on Init
position.
4. Connect both the GW-7472 and your computer to the same
sub network or the same Ethernet switch, and power the GW-
7472 on.
DIP
GW-7472 Quick Start
2
Advertisement
