Advertisement
7
Self-Test
1) In the eSearch Utility, select the "Modbus TCP Master" item from the
"Tools" menu to open the Modbus TCP Master Utility.
2) In the Modbus TCP Modbus Utility, enter the IP address of tGW-700-T
and click "Connect" to connect the tGW-700-T.
3) Refer to "Protocol Description" section and type the Modbus command
in the "Command" field then click "Send command".
4) If the response data is correct, it means the test is success.
Note: The Modbus command settings depends on your Modbus
device.
Technical support:
service@icpdas.com
P8
Advertisement
