Motorola MOTO Q 9h Global User Manual page 68

log into AT&T Navigator
1 After you install AT&T Navigator, press Start,
then All Programs > AT&T GPS > ATT Navigator.
AT&T Navigator asks you to enter your (mobile)
phone number, name and AT&T Navigator PIN.
You received your AT&T Navigator PIN in a text
message when you activated your subscription.
To activate a subscription, visit att.com/navigator.
2 Enter your information and press Login.
generate a route with
AT&T Navigator
1 After you log into AT&T Navigator, select Drive To.
2 Select Address and choose Type It.
3 Enter the address for your destination, then
select Done. AT&T Navigator validates the address
and generates your route.
Congratulations! You generated a route!
66 productivity tools
close AT&T Navigator
To exit AT&T Navigator, go to the main AT&T Navigator
menu and press Exit.