Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Keysight Technologies N2133A
Summary of Contents for Keysight Technologies N2133A
- Page 1 Keysight N2133A 1000 X-Series Oscilloscope Rack Mount Kit Installation Guide...
- Page 2 Notices Technology Licenses © Keysight Technologies, Inc. 2011, 2014, otherwise modify the Software. With respect 2016 to any technical data as defined by FAR The hardware and/or software described in 2.101, pursuant to FAR 12.211 and 27.404.2 No part of this manual may be reproduced in this document are furnished under a license and DFARS 227.7102, the U.S.
- Page 3 In This Guide… This guide contains instructions for installing the 1000 X-Series Oscilloscope Rack Mount Kit. The rack mount kit provides a support shelf and hardware for mounting Keysight 1000 X-Series oscilloscopes into Electronic Industries Association (EIA) standard 19-inch (487-mm) rack cabinets. The rackmount kit includes the following parts: Support shelf assembly (1) (includes pair of retaining...
- Page 4 Here are the dimensions of the support shelf. 482.60 mm 19.00 in. 177.05 mm 6.97 in. 156.00 mm 6.142 in. 1000 X-Series Oscilloscope Rack Mount Kit...
-
Page 5: Installation
Keysight N2133A 1000 X-Series Oscilloscope Rack Mount Kit Installation Guide Installation Prepare the support shelf Attach the oscilloscope to the support shelf Install the support shelf You need the following tools to install the rackmount kit: • T20 TORX driver. - Page 6 Installation Prepare the support shelf 1 Remove the screws and washers that secure the two retaining brackets. Set the screws, washers, and brackets aside. 1000 X-Series Oscilloscope Rack Mount Kit...
- Page 7 Installation Attach the oscilloscope to the support shelf 1 Place the oscilloscope on the support shelf. Slightly raise the rear of the oscilloscope and slide it fully forward until it stops. 2 Push the oscilloscope fully forward on the support shelf assembly. 1000 X-Series Oscilloscope Rack Mount Kit...
- Page 8 Installation 3 Install the two retaining brackets and washers that you previously removed: a Push the brackets fully forward until they stop against the oscilloscope’s rear feet. b Secure each bracket using the screw and washer you previously removed. 1000 X-Series Oscilloscope Rack Mount Kit...
- Page 9 Installation Install the support shelf 1 Place the four sheet metal nuts at their proper locations in the rack front. 2 Hold the support shelf using the front handles, and using the support shelf guide pins, slide the support shelf into the rack cabinet. 3 Fasten the support shelf to the rack cabinet using four 10-32 dress screws.
- Page 10 Installation 1000 X-Series Oscilloscope Rack Mount Kit...
- Page 12 This information is subject to change without notice. © Keysight Technologies, Inc. 2011, 2014, 2016 Printed in Malaysia First edition, November 2016 *N2133-97000* N2133-97000 www.keysight.com...
Need help?
Do you have a question about the N2133A and is the answer not in the manual?
Questions and answers