Advertisement
Advertisement
Table of Contents
Related Manuals for Keysight Technologies 46298S
Summary of Contents for Keysight Technologies 46298S
- Page 1 Keysight 46298S Work Surface Installation Guide...
- Page 2 WITHOUT NOTICE, IN FUTURE EDI- without prior agreement and written con- ment of Defense FAR Supplement TIONS. FURTHER, TO THE MAXIMUM sent from Keysight Technologies, Inc. as (“DFARS”) 227.7202, the U.S. govern- EXTENT PERMITTED BY APPLICABLE governed by United States and interna-...
- Page 3 Safety Information Do Not Remove Instrument Cover The following general safety precau- tions must be observed during all Only qualified, service-trained person- phases of operation of this instrument. nel who are aware of the hazards Failure to comply with these precau- involved should remove instrument tions or with specific warnings or oper- covers.
- Page 4 Safety Symbols A CAUTION denotes a hazard. It calls attention to an operating The CSA mark is a registered trade- pro-cedure or practice, that, if not mark of the Canadian Standards Asso- cor-rectly performed or adhered South Korean Class A EMC Declara- ciation and indicates compliance to to could result in damage to the tion.
-
Page 5: Table Of Contents
Contents Work Surface Mounting Kit ................... 6 Contents ........................6 Tools Needed ........................ 6 General Considerations ....................6 Installing the Rails ......................7 Installing the Work Surface ................... 8 Securing the Work Surface ................... 9 Keysight 46298S Work Surface Installation... -
Page 6: Work Surface Mounting Kit
Work Surface Mounting Kit This Installation Guide explains how to install the 46298S Work Surface Mounting Kit. This kit provides a convenient work shelf utility area at the front of the rack. The 46298S Mounting Kit contains the following items. -
Page 7: Installing The Rails
Note that the kit includes 2 sets of filler panels, one set for E- series racks and the other set for all other racks. Use the appropriate set for your rack. 10. Repeat the procedure for the other rail. Keysight 46298S Work Surface Installation... -
Page 8: Installing The Work Surface
(located under the work surface) out from the rail. Locate the work surface in the desired position and release the fasteners. Make sure the fasteners engage in the adjustment holes to fix the work surface firmly in the desired position. Keysight 46298S Work Surface Installation... -
Page 9: Securing The Work Surface
These screws prevent the work surface from accidentally being pulled off of the rails. 2. Test the operation of the shelf. It should move smoothly to each of the six possible working positions. This completes installation of the Keysight 46298S Work Surface Kit. Keysight 46298S Work Surface Installation... - Page 10 This information is subject to change without notice © Keysight Technologies 2015 Printed in Malaysia Edition 3 August 2015 5967-9313 http://www.keysight.com...
Need help?
Do you have a question about the 46298S and is the answer not in the manual?
Questions and answers