Contents Introduction Parts List The M9018A Chassis and Y1270A Frame Y1270A-301 Installation Procedure Step 1: Remove the Chassis Handles and Feet Step 2: Install the Teflon Slides Step 3: Install the Handle Flanges Step 4: Install the Mounting Rails Step 5: Slide the M9018A Chassis into the Rack.
Introduction Introduction The Y1270A-301 rack-mount kit is used to install a M9018A chassis with an attached Y1270A frame into a standard 19" rack. For information on attaching the frame to the M9018A Chassis, see Y1270-90001. Keysight Y1270A-301 Rack Mount Kit Installation Note...
Parts List Item# Part Num Description M9393- Filler panel 1U for 00004 M9018A M9393- Rails for M9018A 00005 M9393- Flange, Left 00002 M9393- Flange, Right 00003 E6640- Slide, Bottom 40003 0515-0896 Screw Machine Keysight Y1270A-301 Rack Mount Kit Installation Note...
Page 7
Parts List Item# Part Num Description 0515-2043 Screw Machine 0570-1577 Dress Scew with Nylon Washer 0590-0804 Metal clip 2680-0278 Screw Keysight Y1270A-301 Rack Mount Kit Installation Note...
The M9018A Chassis and Y1270A Frame The M9018A Chassis and Y1270A Frame The Y1270A-301 rack-mount kit is designed to mount a M9018A chassis with an attached Y1270A frame into a standard 19" instrument rack. In the following image, the M9018A chassis is shown in the background, and the Y1270A frame in the foreground.
Page 9
Y1270A frame into a standard 19" instrument rack. This procedure assumes the M9018A chassis has a Y1270A frame attached to it. Instructions on how to attach a Y1270A frame to a M9018A chassis can be found in Y1270-90001. Keysight Y1270A-301 Rack Mount Kit Installation Note...
In the following image, the mounting hole with the smaller distance from the end of the teflon slide should be closest to the Y1270A frame. Use four machine screws (0515-0896, parts list item 6) to secure the two slides to the bottom of the M9018A chassis. Keysight Y1270A-301 Rack Mount Kit Installation Note...
Page 11
The M9018A Chassis and Y1270A Frame Keysight Y1270A-301 Rack Mount Kit Installation Note...
The left and right flanges are indentified with an "L" and an "R" respectively. The following image shows the right side flange attached. Once both the left and right flanges are attached, the M9018A chassis assembly is ready to be installed in the rack. Keysight Y1270A-301 Rack Mount Kit Installation Note...
Position 3 is optional and is used for aligning front panel clips to the installed rail. Remove this clip once the three clips above it have been attached. Left Rail Keysight Y1270A-301 Rack Mount Kit Installation Note...
With a person on each side of the M9018A, lift and slide it onto the mounting rails. The more straight the M9018A is on the rails, the easier it will slide it into the rack. Keysight Y1270A-301 Rack Mount Kit Installation Note...
Once the M9018A is positioned in the rack, it can be secured. Twist both the left and the right flange handles inwards to install the front panel screws. Secure the front panel with four screws, (0570-1577, parts list item 8). Left Flange Handle Right Flange Handle Keysight Y1270A-301 Rack Mount Kit Installation Note...
The M9018A Chassis and Y1270A Frame Step 7: Install the Filler Panel Using two front-panel dress screws, (0570-1577, part number item 8) secure the filler plate immediately above the M9018A chassis as shown below. Keysight Y1270A-301 Rack Mount Kit Installation Note...
Page 17
This Page Intentionally Left Blank Keysight Y1270A-301 Rack Mount Kit Installation Note...
Need help?
Do you have a question about the Y1270A-301 and is the answer not in the manual?
Questions and answers