Low-profile
PCI 33 MHz
adapter
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Turn off the server and peripheral devices and disconnect all power cords and
3. Pull the server out of the rack; then, remove the cover (see "Removing the
4. Disconnect any cables from the adapter.
5. Remove the screw that holds the adapter in the slot.
6. Carefully grasp the adapter by its top edge or upper corners, and pull the
7. If you are instructed to return the adapter, follow all packaging instructions, and
Installing an adapter
This topic describes installing an adapter in a PCI slot.
To install an adapter, complete the following steps.
Low-profile
PCI Express x8
adapter
on page 43.
external cables.
cover" on page 46).
adapter from the PCI slot.
use any packaging materials for shipping that are supplied to you.
Slot 4
PCI Express x8
Chapter 4. Removing and replacing server components
Slot 2
Slot 1
PCI 33 MHz
PCI 33 MHz
Slot 3
PCI Express x8
49